Common Grill Parts That Need to Be Replaced

The majority of households in the United States own a grill, or barbeque. Most of the components of these grill can be replaced with new grill parts, which increase the life and performance of the outdoor appliance. Charcoal grills require the least maintenance and typically need no more than new charcoal grates and cooking grids. Gas grills, on the other hand, are more complex and many components wear down over time. Replacement grill parts for a gas barbeque include burners, valves and heat shields. Here’s a quick look at the main parts of the grill and when they need to be replaced.

1. Burners

The burner of a gas grill is the source of heat. The burner is hollow with gas inlet and outlet ports, each with a separate control. Some grills have only one burner while others have dual burners with corresponding controls on the control panel. Most burners in a gas grill are H burners or oval burners. High-end grills even have three or four separate burners, called pipe, tube or rail burners. Some are made of cast iron or aluminized steel, although stainless steel gas burners last the longest. If you have a gas grill with cheaper burners and want to extend its life, try replacing these gas grill parts with stainless steel.

2. Cooking grates

The cooking grate, or grid, is the surface the food sits on while it cooks. Cheap grates are made from chrome-plated steel, which don’t last long. Stainless steel is the most durable, followed by porcelain-coated steel and cast iron. Grates that aren’t made of stainless steel will eventually begin to rust when the coating wears off, at which point replacement grill parts are necessary.

3. Rock grates

This grate sits right above the burner. It’s used to hold lava rock or briquettes and keeps drippings from hitting the burner while dispersing heat. This is one of the cheapest replacement parts for a grill and needs to be replaced when it can’t hold rocks. Most are made from carbon steel, which begins to rust rather quickly.

4. Heat shields

The heat shield can also be called a heat plate, heat tent, heat angle or burner shield. This part keeps drippings off of the burner and distributes heat throughout the grill. Heat shields are usually preferred over the rock grate because they don’t hold bacteria and are easier to replace.

5. Valves

Valves need to be replaced when they’re not working properly or begin to rust. Unlike burners, the replacement valve for a grill must fit exactly and parts can be harder to find. Faulty valves is one of the most common reasons most grills are thrown out, although they can be easily replaced if you find the parts for your grill.

6. Posts

Virtually all grill posts eventually rust and need to be fixed, although it’s fairly easy to buy this part that mounts the grill head.

Other grill parts include heat gauges, trays, handles and other small grill accessories. Most of these are available from the original manufacturer or an after-market company.

Alicia D. Walker

Leave a Reply

Next Post

Deciding upon Kitchen area Utensils For Enameled Solid Iron Cookware

Wed Nov 29 , 2023
When picking kitchen area implements for enameled forged iron cookware, it is vital to comprehend the character of the enamel that helps make it distinctive from regular forged iron pots and pans. Regular forged iron can be offered nonstick qualities and rendered less difficult to thoroughly clean by seasoning with […]
Deciding upon Kitchen area Utensils For Enameled Solid Iron Cookware

You May Like